Guide rail curtain installation steps in detail




Slide curtain is a common curtain type, it has the characteristics of easy operation, beautiful and generous, so it is loved by consumers. This article describes the installation procedure of the slide curtain in detail, including preparing materials, measuring dimensions, installing the slide, fixing the curtain, and adjusting the slide effect, so as to help readers successfully install the slide curtain.
🛠️ Prepare the materials
Before installing slide curtains, you need to prepare the following materials and tools: roller ruler, drill, slide, bracket and foot base, hanging ring and hook, wall screws, and expansion tube.
📏 Measure dimensions
Use a roller to accurately measure the height and width of the window. The height of the curtains depends on your personal preference, usually leaving some distance at the top of the window for added visual effect. Measure on the sides and top of the window, and make sure the slide length is enough to cover the width of the window.
🔧 Installing guide rails
Cut the slide to the appropriate length according to the measured dimensions. Use a drill to drill holes in the wall or ceiling and secure the brackets and foot mounts in place. Insert the slide into the bracket and foot to ensure that it is secure and stable.
🔩 Fix curtains
Attach the ring to the curtain. The number of rings depends on the material and size of the curtain. Attach the hook to the slide. The number of hooks should correspond to the number of rings. Hang the curtains on the chute to make sure they are firm and flat. Adjust the position and balance of the curtain to achieve the desired effect.
👀 Adjust the slide effect
After installing the curtains, you may need to adjust the sliding effect to ensure a smooth opening and closing process for the curtains. If the curtain is difficult to slide, you can appropriately add lubricant or adjust the hook position on the slide.

Please post a comment after logging in

    No reply content